PTFE Elastic Supplies
The Cresta elastic supplies are made of the finest PTFE and garantuee an optimal performance of the selected elastic in a topkit and offer optimal protection in every situation.
Smooth Puller Slot
The Smooth Pullerslot is equipped with a PTFE wheel which allows the elastic to be pulled from the pole in an almost frictionless manner. This assists the angler when the elastic is pulled, it also has the benefit of extending the life of the elastic. Attaching the Pullerslot is a simple process thanks to the round shape. Drill a 10mm hole into a reinforced puller zone section. Place the Pullerslot into the hole with the wheel facing towards the top and glue it securely with super glue.
Advised Elastic Diameter
The Smooth Pullerslot can be used with any elastic from 1.0 to 4.0mm.
Round Shape
It is very easy to drill as the shape of the slot is 10mm and fully round.
| Code | 4724-520 |
Flatside Soft Pullerbeads
The Flatside Soft Pullerbeads are made from solid elastic-friendly rubber and feature a tapered hole. The bead clamps nicely on the (hollow) elastic, which can be adjusted to change the tension to your preference. The back of the bead is flattened to fit perfectly against the puller slot without protruding. The soft material prevents the bead from rattling against the pole.
3 Sizes
Each package comes in 3 sizes to suit every diameter of elastic.
Size L: 1.20mm is suitable for hollow elastics from 1.5 to 2.2mm
Size XL: 1.5mm is ideal for hollow elastics from 1.8 to 2.6mm
Size XXL: 2.0mm is ideal for hollow elastics from 2.2 to 4.0mm
Knot
A knot prevents the elastic going through the hole. Make sure the knot is big enough.
| Code | 4724-703 |
Insert Elastic Protectors
The P.T.F.E Insert Elastic Protectors avoid any damage to an elastic during transport in a 2-part (puller) kit. Where the elastic is normally folded over 2 thin carbon walls, it now runs over elastic-friendly and rounded P.T.F.E. material. The two raised sides prevent the elastic from coming into contact with the bottom of a holdall or pole tube. In addition, the Insert protector prevents friction with the inside of the rod, making the elastic function significantly better.
7 Sizes
The Insert Elastic Protectors are supplied in 7 different sizes from 10.0 to 13.0 mm, covering 95% of kits on the market.
Full Protection
The P.T.F.E Insert Elastic Protectors avoid any damage during transport to your elastics.
| Size | 10.0mm | 10.5mm | 11.0mm | 11.5mm | 12.0mm | 12.5mm | 13.0mm |
|---|---|---|---|---|---|---|---|
| Cont. | 2pcs | 2pcs | 2pcs | 2pcs | 2pcs | 2pcs | 2pcs |
| Code | 4724-910 | 4724-920 | 4724-930 | 4724-940 | 4724-950 | 4724-960 | 4724-970 |
P.T.F.E Internal Bushes
This series of bushes is made of high-quality and uncoloured P.T.F.E. material, ensuring all types and diameters of elastic run equally with minimum resistance through the top section. These Internals should be mounted in the top section. Available in 8 sizes, from which the 4 smaller fit the 4 larger exactly. Thanks to the bore reduction system, it is possible to make a top section opening smaller so it can be used for thinner elastic diameters. For competition anglers who like to have their top sections at the exact same lengths, this system is perfect.
8 sizes
The Internal bushes are available in 8 sizes covering elastic up to 3.5mm
Bore Reduction System
Nr 1 fits into nr.5 – Nr 2 fits into nr.6 – Nr 3 fits into nr.7 – Nr 4 fits into nr.8
| Size | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
|---|---|---|---|---|---|---|---|---|
| Diam. | 2.1mm | 2.35mm | 2.6mm | 2.85mm | 3.1mm | 3.25mm | 3.6mm | 3.85mm |
| Cont. | 2pcs | 2pcs | 2pcs | 2pcs | 2pcs | 2pcs | 2pcs | 2pcs |
| Code | 4724-501 | 4724-502 | 4724-503 | 4724-504 | 4724-505 | 4724-506 | 4724-507 | 4724-508 |
P.T.F.E External Bushes
This series of bushes are made of high-quality and uncoloured P.T.F.E. material, ensuring all types and diameters of elastic run equally with minimum resistance through the top section.
8 sizes
The External bushes are available in 8 sizes covering elastic up to 3.5mm
Easy to place
External bushes need to be placed over the outside of a hollow carbon top.
| Size | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
|---|---|---|---|---|---|---|---|---|
| Diam. | 2.25mm | 2.5mm | 2.75mm | 3.0mm | 3.25mm | 3.50mm | 3.75mm | 4.0mm |
| Cont. | 2pcs | 2pcs | 2pcs | 2pcs | 2pcs | 2pcs | 2pcs | 2pcs |
| Code | 4724-601 | 4724-602 | 4724-603 | 4724-604 | 4724-605 | 4724-606 | 4724-607 | 4724-608 |